Services List

At TUNRA Bulk Solids, we complete between 200 and 250 major consultancy projects each year which cover the entire spectrum of bulk solids handling and storage applications. We are leaders in providing conceptual solutions to any bulk materials related task or problem that may occur in your plant.Our comprehensive laboratory test facilities and our highly qualified and committed team of engineers and consultants assist you to overcome existing handling problems and to plan new projects to ensure future trouble-free plant operation.Detailed information about the services offered by TBS can be viewed below either by Industry, Material Type or Handling Problem.For further information about a specific service or if you want to make an enquiry, please contact us directly or use our contact form.
  • Services By Handling Problems

    Feeder Optimisation and Design

    Feeders control the gravity flow of bulk solids from storage, such as bins or stockpiles, to provide a uniform feedrate to the receiving belt conveyor.

    It is vital that the type of feeder be chosen to suit the bulk material being handled and to provide the range of feed rates required. It is also important that feeders be used in conjunction with mass-flow hoppers to ensure both reliable flow and good control over the feeder loads and drive powers. Correct interfacing of feeders and hoppers is essential if performance objectives such uniform draw of material over the whole of the hopper outlet is to be achieved.

    The experienced engineering team at TUNRA Bulk Solids (TBS) offers the following services for feeder optimisation and design:

    feeder

    • Screw Feeder Design Advice
    • Effective feeder hopper design and choice of wall liners to obtain mass flow
    • Optimised feeder interfacing to ensure even draw-down and minimise build-up
    • Feeder vertical and pull-out load calculations
    • Feeder volume calculations
    • Review of existing designs

    screw

    The following case studies highlight a selection of feeder optimisation and design projects completed by TBS

  • Services By Industry

    Feeder Optimisation and Design

    Feeders control the gravity flow of bulk solids from storage, such as bins or stockpiles, to provide a uniform feedrate to the receiving belt conveyor.

    It is vital that the type of feeder be chosen to suit the bulk material being handled and to provide the range of feed rates required. It is also important that feeders be used in conjunction with mass-flow hoppers to ensure both reliable flow and good control over the feeder loads and drive powers. Correct interfacing of feeders and hoppers is essential if performance objectives such uniform draw of material over the whole of the hopper outlet is to be achieved.

    The experienced engineering team at TUNRA Bulk Solids (TBS) offers the following services for feeder optimisation and design:

    feeder

    • Screw Feeder Design Advice
    • Effective feeder hopper design and choice of wall liners to obtain mass flow
    • Optimised feeder interfacing to ensure even draw-down and minimise build-up
    • Feeder vertical and pull-out load calculations
    • Feeder volume calculations
    • Review of existing designs

    screw

    The following case studies highlight a selection of feeder optimisation and design projects completed by TBS

  • Services By Material Type

    Feeder Optimisation and Design

    Feeders control the gravity flow of bulk solids from storage, such as bins or stockpiles, to provide a uniform feedrate to the receiving belt conveyor.

    It is vital that the type of feeder be chosen to suit the bulk material being handled and to provide the range of feed rates required. It is also important that feeders be used in conjunction with mass-flow hoppers to ensure both reliable flow and good control over the feeder loads and drive powers. Correct interfacing of feeders and hoppers is essential if performance objectives such uniform draw of material over the whole of the hopper outlet is to be achieved.

    The experienced engineering team at TUNRA Bulk Solids (TBS) offers the following services for feeder optimisation and design:

    feeder

    • Screw Feeder Design Advice
    • Effective feeder hopper design and choice of wall liners to obtain mass flow
    • Optimised feeder interfacing to ensure even draw-down and minimise build-up
    • Feeder vertical and pull-out load calculations
    • Feeder volume calculations
    • Review of existing designs

    screw

    The following case studies highlight a selection of feeder optimisation and design projects completed by TBS